Submissions

Online Submissions

Already have a Username/Password for Jurnal Teknik Kimia dan Lingkungan?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

 

Author Guidelines

Important Notes:

- The authors should confirm that all authors have read, checked, and approved the manuscript and agreed to its submission.

 - For the manuscript taken from the academic studies, the corresponding author must be the professor of the thesis. 

 - The publisher of JTKL and its editors assume no responsibility for statements and opinions advanced by contributors. The Authors are responsible for copyright permission to use the Software, Standards, Patents, etc.



Submission Metadata

Please make sure to include all authors on your article in the Metadata form (All detailed information is necessary i.e: Name, Affiliation (ie. Department and University), Email).
You can use the “Add Author” button to add the other authors. This is an important step to ensure the blind review process can be conducted without any conflict of interest.

Preparation of Manuscripts

General

Manuscripts should:
  • Be concise and clear.
  • Contain no more than 10 figures and minimum use 15 references as recommended by the journal.
  • Use double line spacing throughout (including reference list and figure legends), and contain continuous line numbering down the left-side of each page.
  • Define all abbreviations when first mentioned.
  • Be submitted in the correct file type, ie. main document in an editable Word format.
  • Be written in either Bahasa Indonesia or English.
  • Contain a title page. 
 
Accepted file types:
  • Please be aware that the combined size of your files should not exceed 40 MB.
  • For article text: doc, docx. We are unable to accept PDF files for article text for revised manuscripts but can do so for first submissions
  • For figures: eps, tiff, jpg, pdf
Changes within revised manuscripts should be highlighted using the highlighter function or coloured text, and should be accompanied by a full response letter to editor and reviewer comments. 
 

Submission Manuscript

All submissions manuscript should be formatted in the following sections: 
 

1. Title Page

  • The title should be clear and concise
  • All authors names and full addresses
  • Corresponding author’s postal and email address
  • A minimum of four keywords describing the manuscript 
  • Word count of the full article, excluding references and figure legends
Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
Author names and affiliations. Please clearly indicate the given name(s) and family name(s) of each author and check that all names are accurately spelled. You can add your name between parentheses in your own script behind the English transliteration. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name.
Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. This responsibility includes answering any future queries about Methodology and Materials. Ensure that the e-mail address is given and that contact details are kept up to date by the corresponding author.
Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
 

2. Abstract

The abstract should be a single paragraph of not more than 250 words, clearly stating the objective of the study or review, the methods used (where applicable), and summarizing results and conclusions.  Avoid abbreviations and references in this section.
Keywords
Immediately after the abstract, provide a maximum of 5 keywords and avoiding general and plural terms and multiple concepts (avoid, for example, "and", "of"). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.
 

3. Introduction

The introduction should set the study in context by briefly reviewing relevant knowledge of the subject; follow this with a concise statement of the objectives of the study.
 

4. Materials and methods

Provide sufficient information for other workers to repeat the study. If well-established methods are used give a reference to the technique and provide full details of any modifications.
  • Include the source of chemicals, reagents and hormones and give the manufacturer’s name and location (town, country) in parentheses.
  • Give the generic name, dose and route of administration for drugs.
  • Specify the composition of buffers, solutions and culture media.
  • Use SI symbols, give concentrations in mol/L and define the term % as w/v or v/v for all solutions. For international units use IU (U should be used for enzyme activity).
  • Specify the type of equipment (microscopes/objective lenses, cameras, detectors) used to obtain images.
  • Specify any image acquisition software used, and give a description of specialized techniques requiring large amounts of processing, such as confocal, deconvolution, 3D reconstructions, or surface and volume rendering.
 

5. Results

 Results should be clear and concise.

6. Discussion 

This should explore the significance of the results of the work, not repeat them. Avoid extensive citations and discussion of published literature.

Figure captions
Ensure that each illustration has a caption. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.

Tables

Please submit tables as editable text and not as images. Tables can be placed either next to the relevant text in the article, or on separate page(s) at the end. Number tables consecutively in accordance with their appearance in the text and place any table notes below the table body. Be sparing in the use of tables and ensure that the data presented in them do not duplicate results described elsewhere in the article. 

 

7. Declaration of interest, Funding and Acknowledgements 

Declaration of interest

Actual or perceived conflicts of interest for all authors must be declared in full.
Please either (a) declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research reported; or (b) fully declare any financial or other potential conflict of interest.
 
Conflicts of interest include, but are not limited to:
  • Employment and consultancies
  • Grants, fees and honoraria
  • Ownership of stock or shares
  • Royalties
  • Patents (pending and actual)
  • Board membership

Funding

Please detail all of the sources of funding relevant to the research reported in the following format:
This work was supported by the Medical Research Council (grant numbers xxxx, yyyy); the Wellcome Trust (grant number xxxx); and Tommy’s Baby charity (grant number xxxx).
 
Where research has not been funded please state the following:
This research did not receive any specific grant from any funding agency in the public, commercial or not-for-profit sector.
 

Author contribution statement (optional)

Please include a statement specifying the contribution of each co-author.
 

Acknowledgements

Please be as brief as possible.
 

8. References

All references cited in the text must be included in the reference list and vice versa. However, if a reference consists of only a web address do not include it in the reference list but cite it in the text, giving the date the page was accessed.
 
Users of Mendeley Desktop can easily install the reference style for this journal by clicking the following link:
 
 
When preparing your manuscript, you will then be able to select this style using the Mendeley plug-ins for Microsoft Word or LibreOffice.


 

Unpublished work

 
Articles accepted for publication but not yet published may be listed as ‘in press’ in the reference list, using the current year as the publication year. If an ‘in press’ article is included in the Accepted Preprint service or a similar scheme, then the Digital Object Identifier (DOI) should be included; otherwise, provide a copy of the article as a supplementary file for reviewing purposes. 
 

In the text and  the reference list

Cite references in the text using JTKL Citation Style Using Mendeley Reference Manager with the css file and how to install provided above.

Bibliography is arranged according to the sequence number of use in the article, the distance between the bibliography is 1 space 12 pt. The writing rules used are as follows:

 

Article

 

 [1]     C. T. Hsieh, W. Y. Ji, H. M. Lin,  M. J. Lee, Multiphase equilibria for mixtures containing water, acetic acid, propionic acid, methyl acetate and methyl propionate, Fluid Phase Equilib., vol. 271, no. 1, pp. 69–75, 2008.

 [2]     M. T. Sanz, S. Beltrán, B. Calvo, J. L. Cabezas,  J. Coca, Vapor Liquid Equilibria of the Mixtures Involved in the Esterification of Lactic Acid with Methanol, J. Chem. Eng. Data, vol. 48,  pp. 1446–1452, 2003.

Book

 [3]     N. P. Cheremisinoff, Handbook of Chemical Processing Equipment, Woburn: Butterworth-Heinemann, 2000.

Thesis (Master) and Dissertation (Ph.D.)

[4]     J. O. Williams, Narrow-band analyzer, Ph.D. dissertation, Dept. Elect. Eng., Harvard Univ., Cambridge, MA,1993.

[5]     N. Kawasaki, Parametric study of thermal and chemical nonequilibrium nozzle flow, M.S. thesis, Dept. Electron.Eng., Osaka Univ., Osaka, Japan, 1993.

[6]     A. A. Wibowo, Novel Cross-Linked Micellar Structures and Application Studies, M.Sc. thesis , Dept. of Polymer Science and Technology, Eskişehir Osmangazi University, Eskişehir, Turkey, 2016.

Seminar Proceedings

[7]  S. R. Ayyubi, Y. Miao, dan H. Shi, Automating standalone smoke alarms for early remote notifications, in: ICARCV, (13th Intern. Conf. on Cont. Automa. Robotics & Vision), Marina Bay Sands Singapore, Dec. 2014.

Notes :

  1. The name of the author in the bibliography is written with the first name abbreviation rule. the abbreviation of the middle name. full written last name
  2. Especially for proceedings, please pay attention to the writing procedure as follows:

Author(s) Initial(s). Surname(s), Title of paper, in Abbrev. Name of Conf., [location of the conference is optional], [vol., no. if available], year, pp. xxx–xxx

Mendeley

Users of Mendeley Desktop can easily install the reference style for this journal by clicking the following link:
 
 
When preparing your manuscript, you will then be able to select this style using the Mendeley plug-ins for Microsoft Word or LibreOffice.
 

9. Tables

Tables should be concise. Tables too large for print publication should be submitted as supplementary data. 
  • Number tables in the order they are cited in the text
  • Include a title – a single sentence at the head of the table
  • Use footnotes to provide any additional explanatory material, cross-referenced to the column entries
  • Give a short heading for each column
  • Explain all abbreviations used in the table in the footnotes
 

10. Figures

The journal has produced digital image guidelines in order to clarify the standards expected by the journal. All submitted digital images must adhere to these guidelines.
 
Colour figures will be published online at no charge to the author. Publication of colour figures in the print version will incur a charge that must be paid before publication. Please note the option to print in greyscale is subject to editorial approval, if the meaning of your image is unclear you will be asked to print in colour and a charge will apply.
  • Number figures in the order they are cited in the text
  • Include legends to all figures, giving the figure number, keys to any symbols used, the name of the organism studied, the names of any statistical tests used and the probability levels used for comparisons
  • Indicate magnification by a scale bar in the bottom right-hand corner of the image and give the measurement in the legend
  • Use the preferred symbols of closed and open circles, squares and triangles. Ensure that symbols are large enough to be read clearly when the figure is reduced for publication
  • Use Courier or a similar non-proportional font for amino acid, DNA, RNA and PCR primer sequences and highlight sections of homology between sequences with grey shading

 

When submitting a manuscript to Jurnal Teknik Kimia dan Lingkungan, submitting author(s) must ensure that the manuscript is their original work, is not plagiarized, wholly or in part. They must also make sure that the submitted article has not been previously published, nor is currently being considered for publication elsewhere, or an explanation has been provided in Comments to the Editor, and that the work of others is properly cited. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guideline of Jurnal Teknik Kimia dan Lingkungan. Finally, it is also the responsibility of submitting author(s) to check that all copyrighted material within the article has permission for publication and that material for which the author does not personally hold copyright is not reproduced without permission.

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  2. The submission file is in Microsoft Word document file format.
  3. Where available, URLs for the references have been provided.
  4. The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  5. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
  6. If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.

 

Copyright Notice

Author(s) retain copyright and full publishing rights of their published articles without restrictions and grant to the publisher non-exclusive right to publish their articles, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media under Creative Commons Attribution-NonCommercial 4.0 International License

 

 

 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.